Skip to main content

Posts tagged with Shapiro Design Lab

Showing 41 - 50 of 90 items
A hand holding a white 3D printed holder. It is a cylindrical container with four small supports.
•
  • Aayush Singla
Circuit Board Holder
3D printed hold for a circuit board for a class project.
Lab Notes
•
  • Thomas Kestler
Things I've Made in the Design Lab
A collection of 3d prints made in the design lab.
Lab Notes
A white 3d printed toothbrush holder shaped like a tooth (molar). The holder has a smiling face in black outline on the front,and has 2 holes in the top to place toothbrushes.
•
  • Hans So
Toothbrush Holder
A 3d printed toothbrush holder, made to look like an actual tooth.
Lab Notes
A purple 3d printed skull and ribcage standing on a wooden table. The ribcage is only printed from the clavicle down to the third rib. Next to it on the table is a black phone for scale.
•
  • Lynnea Jackson
My Spooky Skeleton
A 3d printed skeleton to use for a Halloween candy bowl.
Lab Notes
Gray 3d printed cylinder and gear attached to a guitar peg on the right side and a motor on the left side. The table behind the guitar is a wooden table with a lot of wires and circuit boards.
•
  • Pedro Matheus Araujo
Guitar Peg Winder
A 3d printed part for a project to make an automatic guitar tuner.
Lab Notes
A white 3D printed model airplane sitting on a wooden table.
•
  • Jade McKenzie Griffin
3D Printed Model Airplane
A 3d printed Model airplane for an English class presentation.
Lab Notes
A hand showing off a wooden ring on the ring finger. The hand is white, palm facing up, and the ring has a V design to articulate the wood.
•
  • Dakota Allen Schwark
Plywood Lattice Flexure Ring
Made a latticed plywood ring.
Lab Notes
A set of gray 3D printed parts on a white napkin standing on a gray table. On the napkin are two tall cylinders, and one has a small piping end on the top. Additionally, there are four small tubes laying sideways on the end of the napkin.
•
  • Alexander Thompson
Resin Flow Chamber for Research Project
A flow-through chamber for a research project. The chamber stores resin and has additional connections for tubing.
Lab Notes
A yellow 3d printed prototype of a transducer unit holder supported by silver metal rods. The prototype has a square stand, which connects to a tall U shape, with a horizontal circle on top with 6 sleeves for the metal rods. Throughout the yellow plastic is one row of small holes to place transducer units.
•
  • Jose Eduardo Freire
3d Printed Prototype to CNC Assembly
A 3D printed prototype for a radiation-monitoring CNC assembled project.
Lab Notes
A blue 3D printed model of a sphere "wearing" a set of VR glasses across its middle. The sphere is on a blue 3D printed stand. The photo of the model was taken outside on a concrete ledge, so in the background can be seen a grass park, a blue trash can, pavement, and students talking.
•
  • Isla Rowan McCubbin-Green
3d Printed Logo for Student Org
A 3D printed model and stand of a UMich student org logo.
Lab Notes