Skip to main content

Posts tagged with Shapiro Design Lab

Showing 21 - 30 of 110 items
The hem of a sweater being held up to the camera. The sweater is dark gray with a light gray stripe on top of the dark grey ribbed knit. Above the light gray stripe is an embroidered cutout of a red pikmin (a small bipedal video game character with a white flower on its head)
•
  • Theo Spitler
Sewing Station - Sweater Mending with Pikmin
Mending a sweater using reused Pikmin embroidery in the hole.
Lab Notes
A chunky gray and dark-blue blanket being woven on a 3D printed loom set. The loom set is a long row of pegs, printed in pieces - some are lime green, and some are dark blue.
•
  • Barbara M Stanny
Turning Clearance Yarn into Campus Creativity: A Blanket Saga in SBAR Format
3D Printing a loom for a blanket project.
Lab Notes
A 3D printed blue and purple earring holder. The holder is a flat, circular plate with scalloped edge (like a flower) with a grid of holes in the middle to place earring studs.
•
  • Tasmine Clement
3D Printed Earring Holder
3D printed travel-sized earring holder.
Lab Notes
A white 3D printed figurine of Princess Leia from Star Wars. She is wearing the slave outfit (bikini and skirt) from the beginning of Return of the Jedi, with her hair in a bun. The statue is on a table in front of a blue carpet and a row of windows.
•
  • Andrea Carolina Osteicoechea
3D Printed Star Wars Figurine
3D printed Star Wars figurine as a gift.
Lab Notes
A blue 3D printed rectangular tray, with a divider down the middle vertically.
•
  • Edward Brown
3D Printed Game Piece Storage Tray
3D printed game tray for board game pieces.
Lab Notes
A self-taken picture of a person in a red sweatshirt with a New England Patriots logo. The logo covers the whole front of the sweatshirt - a white N and E with a red star in the top left corner of the N, with two small blue stripes coming from the star on the left.
•
  • Katherine Stewart Bruce
Super Bowl Patriots Sweatshirt
A hand-sewn New England Patriots sweatshirt for the Super Bowl.
Lab Notes
A black 3D printed curved piece meant for the end of a trowel. The piece is short and longer, with a folding seam down the middle, going with the curve. On either side of the angled seam, there is a circular hole that goes through the print (2 holes in total).
•
  • Gembu Maryu
3D Printed Palm Protector
3D printed palm protector for a camping trowel.
Lab Notes
A white 3D printed Pegs and jokers board. It is set up in a square, with each side being one printed piece with a line of pegs. On each piece, there is also a rectangle on the top right side, with a diamond with 5 pegs and an L-shaped corner with 5 pegs.
•
  • Vera Lin
3D Printed Game Board and Pieces
A 3d printed Peg and Jokers board and game pieces.
Lab Notes
A yellow 3D printed block M pencil holder being held in front of a gray sidewalk. The block M used is the University of Michigan "M".
•
  • Jarod Ansen Dufield
3D Printed Block M Pencil Case
A 3d printed block M pencil holder as a gift.
Lab Notes
A 3d printed black laptop part on a wooden table. The part is a long rectangular "corner", where one edge is flat on the table and one edge is pointing up, with a screw hole at one end.
•
  • Tobias Thrien
3D Printed Laptop Part
3D printed replacement part for a personal laptop.
Lab Notes