Skip to main content

Posts tagged with Shapiro Design Lab in Blog Lab Notes

Showing 1 - 10 of 113 items
The center console of a car with a 3D printed cup holder in the right cup holder. The interior of the car is gray, and the image shows the two cup holders, and behind them (towards the front of the car) is a closeable hole. The 3D printed cup holder is tall, and wider than the original cup holder to be able to hold big bottles. It is printed in a shimmery blue-purple color.
•
  • Veeraj Sunil Jethalal
3D Printed Cup Holder
3D printed cup holder for a large bottle to fit in a car cup holder.
A pair of 3D printed white hairpins with a gray 3D printed traditional crown. Each hairpin is a long stick, meant to look like a stem, with a flower and buds at the end, and they are laid down across the image next to each other, with the left flower sitting on the end of the right stem. The crown is a large rectangular shape, with the edges of the rectangle curving down to look semicircular from the front; the top of the crown is much longer than the bottom. All the 3d prints are laying on a black table.
•
  • Xinrui Ji
3D Printed Traditional Crown and Hairpins
3d printed traditional ceremonial crown and hairpins for a photoshoot.
A pair of white hands holding two black 3d printed vertebrae in front of a full white spinal model on a wooden table. The two black vertebrae are held horizontally, interconnected like they would be on a real spine. The spinal model is also laying horizontally, with the top of the spine on the right hand side; the top of the pelvis is visible in the upper left corner of the image. Running up the pelvis and spine and coming out each vertebra is blue-green tubing.
•
  • Sabina Belle Cumming
3D Printed Human Vertebrae
3D printed human vertebrae for a project team.
A series of 3D printed multi-colored arrows on a white background. There are long blue, pink, and red arrows, medium length black, gray, and purple arrows, and short light orange, lime green, and purple arrows.
•
  • Havi E Ellers
3D Printed Colorful Pointer Arrows
3D printed pointer arrows for a museum activity.
A blue 3D printed 8-channel aspirator adapter on a wooden table. The print is vertical, with one tube going into the base and eight tubes coming out of the bottom.
•
  • Samuel Austyn Copper
3D printed 8 Channel Aspirator Adapter
8 Channel aspirator adapter for culture cell experiments.
A large patchwork quilt draped on brick pavement - the top of the quilt is placed on a taller concrete level. Each corner of the quilt is a different color: dark blues in the bottom left, grayish-greens in the bottom right, dark reds in the top left, and white/yellow in the top right. each section moves towards the middle and disperses in the center.
•
  • Alice Colatrella
Patchwork Quilt
Patchwork quilt made using the sewing machine.
An image of a white hand holding a collection of four flat, white 3D printed flowers. Each flower has seven holes in the middle, shaped in a hexagonal pattern with one in the center. The flowers overlap each other, fanning down the hand (inward towards, towards the photographers body)
•
  • Hudson Michael Cooper
3D Printed Flower Frog
3D printed flower frog to help support flower stems in arrangements.
A black 3D printed holder for a servomotor. The holder has a squarish base to the right of the figure, with holes on the sides for the servomotor wires and white circular connectors and gears to go through. The holder also has a long finger-like piece extending out to the left.
•
  • Rowan Volate Cleland-Host
3D Printed Ocarina Servomotor Holder
A 3d printed test part to hold a servomotor for a class project to automate a song on an ocarina.
Two light blue 3D printed models on a gray desk in front of a computer keyboard. The model on the left is a phone holder shaped like a cat bending down or stretching. On the cat's back a phone is balanced sideways, where you can see the black screen. The model on the right is a hexagonal model of a mountain slope with lines detailing snowboard trails. There is writing on the base, but it is not legible in this photo.
•
  • Martin Tan
3D Printed Cat Stand & Snowboard Trail Model
A 3D printed cat phone holder & a mountain slope model with outlined snowboard trails.
A puppet of a silkie chick sitting on black fabric in front of a wooden floor. The puppet is covered in tan "feathers", and it is positioned so the face is looking at the camera; there is a little hole in the feathers where the beak is somewhat visible.
•
  • Theo Spitler
3D Printed Puppet Skeleton
3D printed puppet skeleton for a silkie chicken puppet.