Skip to main content

Posts tagged with Shapiro Design Lab in Blog Lab Notes

Showing 11 - 20 of 80 items
A colorful 3D printed geometric skull. Rather than a smooth (normal skull) surface, this print has a multifaceted pattern, so some of the edges catch the light, especially on the top of the skull. The top of the skull is red, around the eyes the print is orange, around the nose is yellow, the top of the jaw is light green, and the mandible is blue green/teal.
•
  • Sirong Guo
3D Printed Skull
3D printed multi-color skull.
Two black 3D printed stands - one is holding Nintendo switch controllers, and a controller case, and the other is holding a nintendo Gamecube controller. All controllers are being held "standing up".
•
  • Nick Geiser
3D Printed Controller Stands
3D printed stands for Nintendo Switch and Gamecube controllers.
A top-down image of a collection of 10 white 3d printed organizer trays with small indented sections to separate parts. most of the trays are filled with various game pieces and small tokens.
•
  • Jaccob M Bell
3D Printed Organizer
3D printed organizer for board game materials.
Two 3D printed gray bobbins, circular, on a workbench with copper wire coiled around them.
•
  • Conner Klein
3D Printed Coil Bobbin
3D printed bobbins for physics research.
A pair of black over-the-ear headphones with a white 3D printed support band attached to the headband.
•
  • Pranav Srinivasan
3D Printed Headphone Band
3D printed headband for a pair of broken headphones.
The back of a router with a black 3D printed mount in the middle. There are lots of wires and ports connected into the router.
•
  • Jen Bradley
3D Printed Bracket for Router
3D printed rack mount for a router to study networks.
A purple 3D printed rectangular case in three parts - one outline with a support cross-beam (for the width of the device) and two panels for the front and back of the device.
•
  • Dylan Alexander Cohen
3D printed Radio Case
3D printed case for radio hardware.
A 3D printed camera mounted on a pair of surgical glasses.
•
  • Tal Kalimian
Loupe Camera Project
Creating a small camera to document surgical procedures.
3D printed 3-story shelves built to look like a house with stairs and platforms. The smiski figurines are positioned on it across the layers, and the room is dark, showing the figurines glowing in the dark.
•
  • Koki Umemura
3D printed Smiski House
3D printed house to show off Smiski collectable figurines.
A blue 3d printed rectangular case with an open top - the case has sensors inside, which are connected by a wire to a battery pack strapped to the outside of the case. The (open) top of the case is taped over with scotch tape.
•
  • Ethan Dhomnic
3D Printed Sensor Case
3D printed case for a class project.