Skip to main content

Posts tagged with 3D printing in Blog Lab Notes

Showing 11 - 20 of 76 items
A purple 3D printed rectangular case in three parts - one outline with a support cross-beam (for the width of the device) and two panels for the front and back of the device.
•
  • Dylan Alexander Cohen
3D printed Radio Case
3D printed case for radio hardware.
A 3D printed camera mounted on a pair of surgical glasses.
•
  • Tal Kalimian
Loupe Camera Project
Creating a small camera to document surgical procedures.
3D printed 3-story shelves built to look like a house with stairs and platforms. The smiski figurines are positioned on it across the layers, and the room is dark, showing the figurines glowing in the dark.
•
  • Koki Umemura
3D printed Smiski House
3D printed house to show off Smiski collectable figurines.
A blue 3d printed rectangular case with an open top - the case has sensors inside, which are connected by a wire to a battery pack strapped to the outside of the case. The (open) top of the case is taped over with scotch tape.
•
  • Ethan Dhomnic
3D Printed Sensor Case
3D printed case for a class project.
A 3D printed blue arched garden bridge with railings.
•
  • Cassandra Lynne Reece
3D printed Bridge
3D printed bridge for a birthday gift.
The outside of an illustrated cardboard box. On the side of the box is six small drawings of possible "collectible" figures - a lucky cat, a slime, a venus fly trap, a phoenix, a goblin, and a minotaur.
•
  • Christopher Michael-Acierno Mojares
Roblox 3D Printed Collectables
A "blind box" with 3D printed collectable figures from a Roblox game.
A blue 3d printed set of six keyboard-style keys in a 3x2 rectangle.
•
  • Ayumi Manome
Key Clicker Fidget
A key-clicker fidget toy as an intro to 3-D printing.
A series of white 3D printed tube connectors for PVC piping on a black table. Two are T-connections, two are right-angle connections, and the last is a cup with two holes in the bottom. One of the right-angle connections is being held towards the camera, to see inside.
•
  • Varindra Chouhan
3D printed PVC Connectors
3D printed connection tubes for PVC pipes for research model.
A blue 3d printed head for a putter (golf).
•
  • Jack Henry Verlinden
3D Printed Putter Head
3D printed putter head as a manufacturing prototype.
A hand holding a white 3D printed holder. It is a cylindrical container with four small supports.
•
  • Aayush Singla
Circuit Board Holder
3D printed hold for a circuit board for a class project.